By Prof.Sham Tickoo Purdue Univ.

ISBN-10: 1942689012

ISBN-13: 9781942689010

Show description

Read or Download AutoCAD 2016: A Problem-Solving Approach, 3D and Advanced PDF

Similar cad books

Get AutoCAD 2004 Bible PDF

* contains new beneficial properties, equivalent to greater than 80 productiveness instruments, new printing improvements, more straightforward administration of exterior reference drawings, and lots more and plenty extra. * No adventure is needed; the 1st half courses beginner clients throughout the AutoCAD interface, but the booklet is so whole that even veteran AutoCAD clients should want to hold it via their computers.

Ken Kundert's The Designer s Guide to Spice and Spectre PDF

Engineering productiveness in built-in circuit product layout and - velopment at the present time is restricted mostly by means of the effectiveness of the CAD instruments used. For these domain names of product layout which are hugely depending on transistor-level circuit layout and optimization, resembling high-speed good judgment and reminiscence, mixed-signal analog-digital int- faces, RF features, energy built-in circuits, and so on, circuit simulation may be the only most vital instrument.

Download PDF by Ellen Finkelstein: AutoCAD 2012 and AutoCAD LT 2012 Bible

The newest model of this perennial favourite, in-depth, reference-tutorialThis top-selling e-book has been up-to-date via AutoCAD guru and writer Ellen Finkelstein to supply you with the very newest insurance of either AutoCAD 2012 and AutoCAD LT 2012. It starts with a brief commence instructional, so that you begin growing instantly.

Extra resources for AutoCAD 2016: A Problem-Solving Approach, 3D and Advanced

Example text

Specify first point: 1,1 Specify next point or [Undo]: @10,0 Specify next point or [Undo]: @0,8 Specify next point or [Close/Undo]: @-10,0 Specify next point or [Close/Undo]: C 2. Choose the Move Origin Only option; AutoCAD will prompt you to specify a new origin point. The prompt sequence is as follows: Specify first point: 1,1 Specify next point or [Undo]: @6,0 Specify next point or [Undo]: @0,8 Specify next point or [Close/Undo]: @-6,0 Specify next point or [Close/Undo]: C 4. When you open a new drawing, you view the model from the top view by default.

Alternatively, right click on the name of the specific UCS in the list box and then choose the Details option from the shortcut menu. To define an orthographic coordinate system relative to a UCS, select it from the Relative to drop-down list. Next, select the orthographic view from the list of preset orthographic views, and then choose the Set Current button; the UCS icon is placed at the corresponding view. The name of the current UCS is displayed above the list of orthographic view. If the current settings have not been saved and named, the Current UCS name displayed is Unnamed.

Alternatively, choose the Show UCS Icon at Origin button from the Coordinates panel in the Home tab. ORigin This option is used to place the UCS icon at the origin of the current UCS. By default, UCS is selectable. You can also display this dialog box by choosing the UCS Icon, Properties tool from the Coordinates panel in the Home tab. The options in this dialog box are discussed next. UCS icon style Area The options in this section are discussed next. Figure 1-5 The UCS Icon dialog box 3D. By default this option is already selected.

Download PDF sample

AutoCAD 2016: A Problem-Solving Approach, 3D and Advanced by Prof.Sham Tickoo Purdue Univ.


by Steven
4.5

Download e-book for kindle: AutoCAD 2016: A Problem-Solving Approach, 3D and Advanced by Prof.Sham Tickoo Purdue Univ.
Rated 4.81 of 5 – based on 42 votes