By Ian Mawdsley

ISBN-10: 1136078304

ISBN-13: 9781136078309

Clients consultant for AutoCad 2000i

Show description

Read Online or Download AutoCAD 2000i PDF

Best cad books

Ellen Finkelstein's AutoCAD 2004 Bible PDF

* comprises new good points, equivalent to greater than 80 productiveness instruments, new printing improvements, more straightforward administration of exterior reference drawings, and lots more and plenty extra. * No event is needed; the 1st half publications beginner clients throughout the AutoCAD interface, but the e-book is so whole that even veteran AutoCAD clients should want to continue it through their desktops.

New PDF release: The Designer s Guide to Spice and Spectre

Engineering productiveness in built-in circuit product layout and - velopment this present day is restricted mostly via the effectiveness of the CAD instruments used. For these domain names of product layout which are hugely depending on transistor-level circuit layout and optimization, similar to high-speed common sense and reminiscence, mixed-signal analog-digital int- faces, RF services, strength built-in circuits, and so on, circuit simulation might be the one most vital device.

Ellen Finkelstein's AutoCAD 2012 and AutoCAD LT 2012 Bible PDF

The newest model of this perennial favourite, in-depth, reference-tutorialThis top-selling booklet has been up to date via AutoCAD guru and writer Ellen Finkelstein to supply you with the very newest insurance of either AutoCAD 2012 and AutoCAD LT 2012. It starts off with a short begin instructional, so that you begin growing immediately.

Additional info for AutoCAD 2000i

Sample text

Step 2 Next, you need to use the mouse to open the Modify menu and then click on the Properties command. Step 3 Finally, you’ll able to see that the Spline properties window appears on the screen. 58 Working with Ellipse and Point How to draw the Ellipse with Center point To draw the Ellipse with Center point Step 1 To draw the Ellipse with Center point, the first thing you need to do is to use the mouse to open the Draw menu and then open Ellipse sub menu. Later, you have to click on the Center command.

Later, you need to use the mouse to drag and draw the Arc. 44 45 How to show the Arc properties window To show the Arc properties window Step 1 If you would like to show the Arc properties window, first, select the Arc that you want to show its properties. Step 2 Later, use the mouse to open the Modify menu and then click the Properties command. Step 3 Finally, you’ll able to see that the Arc properties window appears on the screen. 46 47 How to draw the Circle with Center, Radius To draw the Circle with Center, Radius Step 1 To draw the Circle with Center, Radius, first, you must use the mouse to open the Draw menu and then open the Circle sub menu.

58 Working with Ellipse and Point How to draw the Ellipse with Center point To draw the Ellipse with Center point Step 1 To draw the Ellipse with Center point, the first thing you need to do is to use the mouse to open the Draw menu and then open Ellipse sub menu. Later, you have to click on the Center command. Step 2 Next, you need to place the insertion point to where you wan to insert it. Step 3 Now, you need to specify the axis endpoint of ellipse and after that, specify the center of ellipse.

Download PDF sample

AutoCAD 2000i by Ian Mawdsley


by Daniel
4.1

Download e-book for iPad: AutoCAD 2000i by Ian Mawdsley
Rated 4.17 of 5 – based on 3 votes